Hook up laundry sink, install it
Warning Avoid pouring paint or hazardous chemicals that could contaminate the groundwater into the sink. Coat the thread of the male adapter with Teflon paste, then firmly tighten it into the old cleanout threads.
About 24 inches to the left of where I want to install the sink, there is an existing 2" pvc standpipe which the washer drains into, via a u-shaped flexible hose. Bucketused to collect water drained from water pipes. Close-quarter tubing cutter, used to cut copper tubing.
The location in the laundry room or garage, however, usually means that you don't need to bury the plumbing pipes in the wall. Position and place the Y-fitting on the drain line.
In D OP version the sink does have a vent shared and as long as it's within the recommended distance from the trap it doesn't need one of its own. I would have to read it. Mike NJ "The problems that exist in the world today cannot be solved by the level of thinking that created them". Repeat this process for the other water line. Then mark the center of the new hole on the wood and drill the hole hook up laundry sink a hole saw as you normally would.
Adding Sink Valves To Laundry Supply Lines
In case C the sink ties in to the standpipe, without its own p-trap. Glue the sections together with primer and solvent glue. Sign Up for our newsletters!
Posted In Doors, Skylights and Windows. In NY travelers drawing the sink has no vent.
Drill the dr phil online dating scams update jen hole Drill holes in the sink for the new faucet and soap dispenser.
A wet vent is when a fixture is using a vent.
Case A wet vent. And have a Happy Thanksgiving! Remove from stem from the shut-off valves and solder the valves to the pipe ends.